FLYCOM61D_11C_INFINITY_Y006B_PCB01_gprs_MT6261_S00.WINSTAR_WBX-2_V1_2_20161109
WINSTAR WBX-2 MT6261 CM2 READ FILE 100% TESTED
WINSTAR WBX-2 MT6261 HANG ON LOGO PROBLEM 100% TESTED
WINSTAR WBX-2 MT6261 DEAD RECOVERY DONE 100% TESTED
1. Power Off Phone , Remove battery , Insert back
2. Insert USB cable. In some cases require hold BootKey ( '*' )
Wait for phone...
Phone found! [ 145 ]
Sync...
Sync Ok, read regs...
Inital regs read done
Boot Info :
BB_CPU_ID : 6261
BB_CPU_HW : CB01
BB_CPU_SW : 0001
BB_CPU_SB : 8000
BB_CPU_NM : [MediaTek] MT6261_S0000
BB_CPU_SN : C83DA0295B2C3324D1E07FFBCD8C2FC8
BROM Protocol Version : 05
Setting...
Setting done , result code 0x000E
BROM stage done
Seek and prepare DownloadAgent
DownloadAgent matching HW Found!
DA verify and select done
Sending DA to target ...
DA_INFO : 0xC0 , Ver : 3.2 , BBID : 0x8E
SOC_VERIFY : 0xC1
BOOT_STYLE : SF_FLASH_BOOT
NOR Flash IC initialized
[0] : FLASH_VEN : 0x0113 , [Winbond] SF_W25Q32JV
[0] : FLASH_DIE : 00EF 0070 0016 0000
[0] : FLASH_LEN : 0x00400000
SDS_INFO : 0x003FE000 , 0x00002000
INT_RAM : 0x0000D000
EXT_RAM : 0x00400000
Reading Flash Content now ...
Read Flash now
Read Ok , 4194304 bytes read
Check and collect compile info
File_Info : FLYCOM61D_11C_INFINITY_Y006B_PCB01_gprs_MT6261_S00.WINSTAR_WBX-2_V1_2_20161109.bin
FileVersion : WINSTAR_WBX-2_V1.2_20161109
Saved to : C:\InfinityBox\CM2MTK\Read_out\FLYCOM61D_11C_INFINITY_Y006B_PCB01_gprs_MT6261_S00.WINSTAR_WBX-2_V1_2_20161109.bin
Done!
Elapsed: 00:00:19
Reconnect Power/Cable!
